Paradyne 6301, 6341, 6342, 6371, 6351, 6302 manual DSL Router Configuration Examples

DSL Router Configuration

Examples

4

Configuration Examples

The Hotwire DSL Router configuration examples in this chapter include only a few of the possible scenarios. This chapter covers some of the common configurations. The command syntax will vary based on your network setup.

Configuration commands require the access level of Administrator-Config and changes need to be saved while in configuration mode to take effect. Refer to Chapter 2, Accessing the DSL Router.

The Hotwire DSL Router configuration examples include:

￿Basic Bridging Configuration Example

￿Basic Routing Configuration Example

￿Basic NAT Configuration Example

￿NAPT Configuration Example

￿Simultaneous Basic NAT and NAPT Configuration Example

￿Unnumbered DSL Interface with Proxy ARP Configuration Example

￿DHCP Relay with Proxy ARP Configuration Example

￿DHCP Server with Basic NAT Configuration Example

￿PPPoE Client with NAPT and DHCP Server Configuration Example

￿Downstream Router Configuration Example

￿IP Passthrough Configuration Example

Refer to Appendix A, Command Line Interface, for specific commands and their syntax. Refer to Appendix B, Configuration Defaults and Command Line Shortcuts, for specific command default settings and abbreviated command line syntax.

6300-A2-GB20-10 November 2003 4-1