Paradyne 6371, 6341, 6301, 6342 Table A-17. Show Commands 2, Show bridge, Show config, Show console

A. Command Line Interface

Table A-17. Show Commands (2 of 10)

show bridge

Minimum Access Level: Operator

Command Mode: Standard

Displays the bridge configuration and forwarding database.

Sample show bridge display:

Bridging – disabled

Spanning tree – enabled

Configured aging timeout: 300 seconds

Filtering database entries:

MAC addr	action	interface	timeout (sec.)
xx:xx:xx:xx:xx:xx	xxxxxxx	xxxxxx	xxxxxxxxxxxx

NOTES:

–Action can be discard or forward.

–Timeout can be Permanent, the number of seconds left before the entry is aged out and goes away, or <1 (less than a second).

show config

Minimum Access Level: Operator

Command Mode: Standard

Sample show config display:

syslog {enabled disabled} eth1 frame {DIX 802.3}

proxy ARP eth1 {enabled disabled} proxy ARP dsl1 {enabled disabled} basic NAT {enabled disabled}

NAPT {enabled disabled} or NAT disabled * DHCP server {enabled disabled}

DHCP relay {enabled disabled} bridging {enabled disabled} IP routing {enabled disabled} IP multicast {enabled disabled} packet processing {enabled disabled} dsl1 1483 encapsulation {LLC VC Muxing} autologout {enabled disabled}

PPPoE client {enabled disabled} telnet {enabled disabled}

telnet login required {enabled disabled}

* NAT disabled only appears when both forms of NAT are disabled.

show console

Minimum Access Level: Operator

Command Mode: Standard

Displays either console enabled or console disabled.

6300-A2-GB20-10 November 2003 A-25