ColorQube™ 9201/9202/9203 | Authentication |
7.Check the [Enable 802.1X] box.
8.Select the required [EAP] type from the [Authentication Method] drop down menu.
9.Enter the [User Name (Device Name)] and [Password] required by your authentication switch and server.
10.Click on the [Apply] button.
11.Click on the [OK] button when you see the window that says “Properties have been successfully modified”.
12.Select [Logout] in the upper right corner of your screen if you are still logged in as Administrator, and click on the [Logout] button.
Xerox Secure Access
Xerox Secure Access enables customers to leverage Xerox Partner Solutions to provide user authentication with an optional card reader. Users can access the features available at the device once they have been authenticated.
System Administrators can configure the device so that users must be authenticated and authorized before they can access specific services or areas. Xerox Secure Access provides a means of authenticating users via an authentication server and optional card reader.
Secure Access and Accounting
Secure Access can be enabled with the Network Accounting, Xerox Standard Accounting features for accounting purposes. When Network Accounting is enabled, the device can be configured to automatically obtain accounting data from the Network Accounting server when the user is authenticated.
Note
Secure Access cannot be enabled at the same time as Foreign Device Interface.
Information Checklist
Before starting the installation procedure, please ensure the following items are available or have been performed:
•Ensure that the device is fully functional on the network. TCP/IP and HTTP protocols must be configured so that Internet Services can be accessed.
•Ensure that the Xerox Partner authentication solution (Secure Access Server, Controller, and Card Reader) is installed and communicating with the device. Follow the installation instructions from the manufacturer of the authentication solution to correctly set the devices up. Make sure to securely mount any external user authenticating devices to the device.
•Ensure that SSL (Secure Sockets Layer) is configured on the device. The Xerox Partner authentication solution communicates with the device via HTTPS.
•(Optional) Ensure that Network Accounting is configured if you want the device to send user account information to a Network Accounting server. For instructions, refer to the Network Accounting section of this guide.
•You may also need another Authentication Server (running LDAP in an ADS environment, for example) to communicate with the Secure Access Server providing that server with user credentialing information.
System Administrator Guide |
