ColorQube™ 9201/9202/9203 | Network Installation |
CUPS
The Common UNIX Printing System (CUPS) was created by Easy Software Products in 1998 as a modern replacement for the Berkeley Line Printer Daemon (LPD) and A T and T Line Printer (LP) system designed in the 1970s for printing text to line printers.
Currently available for downloading from a number of sources on the Internet, such as www.cups.org, CUPS is offered in both source code and binary distributions.
Information Checklist
Before starting the installation procedure, please ensure the following items are available or have been performed:
•Ensure TCP/IP and HTTP are configured on the device as per Enable TCP/IP and HTTP at the Device on page
•Ensure that the DNS settings are configured.
Enable Port 9100 as additional support for HTTP (IPP) printing
1.At your Workstation, open the web browser and enter the IP address of the machine in the Address bar, and press [Enter].
2.Click the [Properties] tab.
3.If prompted, enter the Administrator User ID and Password. The default is [admin] and [1111].
4.Click on the [Login] button.
5.Click on the [Connectivity] link.
6.Click on the [Protocols] link.
7.Select [Raw TCP/IP Printing] in the directory tree.
8.Ensure the [Enabled] box is checked to enable Raw TCP/IP Printing.
9.Leave the [TCP Port Number] set to 9100 for Port 1. If two additional ports are available, click [Default All] to see if they set to 9101 and 9102 respectively (emulating HP JetDirect EX Plus 3).
10.Leave the [Bidirectional] checkboxes and [Maximum Connections] settings at their default values.
11.Set the [End of Job Timeout] to the number of seconds to wait before processing a job without an End Of Job indicator.
12.Leave the [PDL Switching] Enabled box at its default value.
13.Click on the [Apply] button to accept the changes.
14.Click on the [OK] button when you see the window that says “Properties have been successfully modified”.
Note
The settings are not applied until you restart the machine.
15.Click on the [Status] tab, select [Description & Alerts] in the directory tree.
16.Click the [Reboot Machine] button and click [OK] to reboot the machine. The network controller takes approximately 5 minutes to reboot and network connectivity will be unavailable during this time.
Installing CUPS on the UNIX workstation
The instructions for installing and building CUPS are contained in the CUPS Software Administrators Manual, written and copyrighted by Easy Software Products and available for downloading at: www.cups.org/documentation.php.
System Administrator Guide |
