Network Installation | ColorQube™ 9201/9202/9203 |
2.Click on the [Properties] tab.
3.If prompted, enter the Administrator User ID and Password. The default is [admin] and [1111].
4.Click on the [Login] button.
5.Click on the [Connectivity] link.
6.Click on the [Protocols] link.
7.Select [LPR/LPD] in the directory tree.
8.Check the [Enable] box to enable LPR/LPD.
Note
Disabling LPR/LPD will affect clients printing to the device over TCP/IP using the LPR printing port.
9.In the Port Number, enter an LPR/LPD port number. The default is 515.
10.In the Advanced Settings area, check the [Enabled] box to enable PDL Switching. PDL switching allows the device to process print jobs which contain two or more printer languages, for example: PCL and PostScript, or ASCII and PostScript.
11.Check the [Enabled] box to enable PDL banner page attributes override LPR control file attributes for job name and owner. This feature allows you to replace the standard information displayed on a banner page, and substitute the user name and job name taken from the print job.
12.Select the required option from the [Place temporary hold on which jobs:]
–Only those with data file received 1st - The device holds the job if the job's data file is received first. This ensures the device waits to receive the job's control file information so that the banner sheet contains accurate information.
–All (consistent with older implementations) - This option puts all jobs on hold. All data is received before a job begins to print. This setting can cause jobs to print slowly but will result in accurate banner sheet information.
–None (Use printer's default banner sheet job name if data file 1st) - The device will not wait to receive the job control information. This selection may cause banner sheet information to print incorrectly.
13.Click on the [Apply] button to accept changes or [Undo] to return the settings to their previous value.
14.Click on the [OK] button, when you see the window that says “Properties have been successfully modified”.
Configure Raw TCP/IP Printing
Note
TCP/IP must be enabled before Raw TCP/IP Printing is enabled.
Raw TCP/IP is a printing method used to open a TCP
1.At your Workstation, open the web browser and enter the IP address of the device in the Address or Location field. Press [Enter].
2.Click on the [Properties] tab.
System Administrator Guide |