ColorQube™ 9201/9202/9203 | Network Installation |
Lan Attachment: *IP
Port Number: 9100
Online at IPL: *yes
Font Identifier: 11
Form Feed *autocut
Note
For some versions of AS400, the default may match some of these parameters.
3.Leave all other parameters at the default value, press [Enter], and enter the following parameters: Activation Timer: 170
Inactivity Timer: *sec15
Host Print Transform: *yes
4.Press [Enter] to continue, and enter the following parameter: Manufacturer Type and Model: *hp5si
5.Leave the remaining parameters set to their default values and press [Enter] to continue. Enter the following parameters: Remote Location: Enter the IP address of the printer.
User defined options: *IBMSHRCNN
System driver program: *IBMSNMPDRV
6.Leave all other options set to the default values and press [Enter]. A message indicates that you created the device Xerox printer.
7.Power on the device and start a print writer. Then place a spool file in the appropriate queue to test the printer.
AS400 Printing using LPR (CRTOUTQ) - Optional
Creating a remote queue (LPR) on the AS400
1.At the command line, issue CRTOUTQ and press F4, then F9 for additional parameters. The setup is as follows:
Note
ONLY CHANGE THE PARAMETERS IN BOLD.
•Output queue: queue name
•Library: Library name
•Maximum spooled file size
•Number of pages: *NONE
•Starting time: Time
•Ending time: Time
•Order of files on queue: *FIFO
•Remote system: *INTNETADR
•Remote printer queue: virtual printer name**
Note
The queue for ColorQube should be lp (lower case L and P).
•Writers to autostart: 1
•Queue for writer messages: QSYSOPR
•Library: *LIBL
•Connection type: *IP
•Destination type: *OTHER
System Administrator Guide |