ColorQube™ 9201/9202/9203

Network Installation

16.Check the [Enabled] box for Self Assigned Address, under Zero-Configuration Networking, to support communicating with other devices using 169.254/16 IPv4 addressing, over the same physical or logical link (such as in ad hoc, or isolated (non-DHCP) networks). Refer to the IETF website for zeroconf details.

17.Check the [Enabled] box for Multicast DNS to resolve host names to IPv4 addresses without using a conventional DNS server.

Supporting LPR Printing

18.Select [LPR/LPD] in the directory tree.

19.Check the [Enabled] box to enable LPR/LPD.

Configure SLP (if needed to support CUPS, Mac OS, and NetWare)

20.Select [SLP] in the directory tree.

21.Check the [Enabled] box to enable Service Location Protocol (SLP).

22.Enter an [IP address] for the Directory Agent, if required.

23.Enter the required name(s) for [Scope 1,2,3].

24.Select the Message type from the drop down list for [Multicast or Broadcast].

25.Enter a value for [Multicast Radius] (0-255).

26.Enter a value for MTU to set the Maximum Transmission Unit (484 - 32768), with 1400 as the default. This allows you to set the maximum packet size for SLP.

27.Click on the [Apply] button to accept the changes or [Undo] to return the settings to their previous values.

28.Click on the [OK] button when you see the window that says “Properties have been successfully modified”.

Note

The settings are not applied until you restart the device.

29.Click on the [Status] tab, select [Description & Alerts] in the directory tree.

30.Click the [Reboot Machine] button and click [OK] to reboot the device. The network controller takes approximately 5 minutes to reboot and network connectivity will be unavailable during this time

Configure Raw TCP/IP Printing

Note

TCP/IP must be enabled before Raw TCP/IP Printing is enabled.

Raw TCP/IP is a printing method used to open a TCP socket-level connection, over Port 9100, to stream a print-ready file to the printer's input buffer, and then to close the connection after sensing an End Of Job indicator in the Page Description Language, or after expiration of a preset timeout value. Port 9100 printing does not require a Line Printer Request (LPR) from the workstation, or the use of a Line Printer Daemon (LPD) running on the printer. Raw TCP/IP printing is selected in Windows 2000 as the Standard TCP/IP port.

1.At your Workstation, open the web browser and enter the IP address of the device in the Address bar, and press [Enter].

2.Click on the [Properties] tab.

3.If prompted, enter the Administrator User ID and Password. The default is [admin] and [1111].

4.Click on the [Login] button.

5.Click on the [Connectivity] link.

6.Click on the [Protocols] link.

7.Select [Raw TCP/IP Printing] in the directory tree.

System Administrator Guide

5-17

Page 71
Image 71
Xerox 9203, 9202, 9201 manual Configure Raw TCP/IP Printing, Supporting LPR Printing

9202, 9201, 9203 specifications

The Xerox 9201, 9202, and 9203 copiers, introduced during the late 1970s and early 1980s, represent a significant leap in office automation technology. These models were part of Xerox's innovative line of copiers, catering to various business needs through their unique features and capabilities.

One of the cornerstone technologies behind the Xerox 9200 series is xerography, a process developed by Chester Carlson in the 1930s. The photocopiers use a dry electrophotographic process, which relies on a photosensitive drum, enabling high-quality and high-speed copying. This technology championed the transition from traditional printing methods to more efficient office practices, revolutionizing how documents were reproduced.

The Xerox 9201 was known for its robust capability to handle a significant volume of copies, appealing primarily to mid-sized organizations. It boasted an impressive speed of up to 80 copies per minute, catering to high-demand settings without compromising the quality of output.

The Xerox 9202 was an enhancement over its predecessor, introducing more advanced features such as automatic document feeding, which significantly reduced manual handling and increased productivity. It also supported various paper sizes, making it versatile for different tasks, from simple memos to full-size reports. Additional capabilities included collating, sorting, and stapling, allowing users to complete comprehensive document preparation in a single pass.

The Xerox 9203 further built upon these advancements, offering even faster copying speeds of up to 100 copies per minute. It also allowed for electronic sorting and featured an integrated mail room solution ideal for larger organizations. The 9203’s user interface was designed for ease of use, paving the way for accessible technology in the workplace.

All three models leveraged advanced optics and imaging technology to ensure sharp, clear reproductions. The capacity for duplex printing was a notable feature, enabling users to print on both sides of the paper, which not only saved resources but also contributed to environmentally friendly practices.

Overall, the Xerox 9200 series exemplified the transition towards multifunctional copiers that incorporated advanced features for efficiency, quality, and ease of use in office environments. Their impact on the industry helped shape modern photocopying, setting the benchmark for future models through their blend of technology and practicality. These machines remain a testament to Xerox's legacy in imaging technology and office automation.