Xerox 9203, 9202 Configure NetWare Settings, NetWare Directory Services NDS, Bindery Settings

Network Installation ColorQube™ 9201/9202/9203

NetWare

Information Checklist

Before starting the installation procedures, please ensure the following items are available or have been performed:

•An existing operational NetWare network.

•Login to a NetWare file server/tree as Supervisor/Administrator or have the equivalent privileges.

•Ensure the device is connected to the network via Ethernet cable.

•Set up a print server object using NWADMIN. Refer to the documentation supplied by Novell to complete this task. Record precisely (observe upper and lower case, dot notation) the NDS Tree, NDS Context Name, frame type, Print Server Name and the Print Server password assigned. If your printer services queues on multiple file servers, the Print Server name and password must be the same on all file servers.

Configure NetWare Settings

1.At your Workstation, open the web browser and enter the IP address of the device in the Address bar, and press [Enter].

2.Click on the [Properties] tab.

3.If prompted, enter the Administrator User ID and Password. The default is [admin] and [1111], and click on the [Login] button.

4.Click on the [Connectivity] link.

5.Click on the [Protocols] link.

6.Select [NetWare] in the directory tree.

7.Check the [Enabled] box to enable NetWare protocol.

8.Select the required Filing Transport drop down menu.

9.Select the required [Frame Type] from the drop down list.

10.Type a polling rate for the print server in [Queue Poll Interval] (1 - 240 seconds. The default is 5).

11.Enter the [Print Server Name] The default name is XRX_MAC address.

12.Enter the print server password in the [New Print Server Password] box, then re-enter it in the [Retype New Print Server Password] box. Place a check in the [Select to save new password] box.

Service Advertising Protocol (SAP)

13.Check the [Enabled] box if you wish to enable SAP protocol.

14.Enter the [SAP Frequency] (from 15 - 300 seconds or enter 0 for none. The default is 60).

Bindery Settings

15.If using NetWare in Bindery mode, enter the names of up to four primary [File Servers] for the device in the Bindery Settings box.

NetWare Directory Services (NDS)

1.If using NetWare NDS (NetWare Directory Services), enter a directory tree and context for the device in [NDS Tree] and [NDS Context] in the Netware Directory Services (NDS) box.

5-26 System Administrator Guide