Print Drivers | ColorQube™ 9201/9202/9203 |
Windows Vista
Xerox Printer Installer
This section provides instructions on how to install printer drivers manually. However, you can use Xerox Printer Installer to discover the printer and install drivers.
To use the Xerox Printer Installer locate the CentreWare Print and Fax Drivers
Information Checklist
Before starting the installation procedure, please ensure the following items are available or have been performed:
•Verify the device is configured with the correct IP Address, Subnet Mask, and Gateway Address information by printing a Configuration Report.
To print a Configuration Report, go to the Device
a.Press the <Machine Status> button.
b.Touch the [Machine Information] tab.
c.Touch [Information Pages].
d.Touch [Configuration Report].
e.Touch [Print], then touch [Close].
•Locate the CentreWare Print and Fax Drivers CD. (This was delivered in the CentreWare Network Services Pack with your device.) Review any README file contained with the printer drivers.
To install printer drivers on Windows Vista choose one of the following options:
•Connect to an existing print queue already created on a network server
•Create a new print queue on the Windows Vista workstation
Connect to an Existing Print Queue
Note
You will need to know the server name where the print queue is located and the printer share name.
1.At your Workstation, click on [Start] then select [Control Panel]. Open the [Printers] folder.
2.
3.Click [A printer that is not attached to my computer (network printer)].
4.Click on [Next].
5.The Searching for network printer screen will appear. Click on [Next].
6.The Specify a Printer screen appears.
7.Click on [Browse for a Printer] and click on [Next].
8.Select the server where the print queue is located and click the printer share name.
9.Click on [OK].
10.Click on [Yes] to connect to the printer.
System Administrator Guide |
