Data Capture for Workforce in Motion
1.4.1.Real Time mode
Erases all captured data stored in memory and forces the scanner in Real time mode. No other setting is changed.
Important reminder: if an ACK beep or buffer is needed, the scanner must be set in the “no data loss mode” first.
Enable Real Time with « No Data Loss »
mode
Enable Real Time without « No Data
Loss » mode
1.4.2.No Data Loss mode - Enable “ACK” beep
Forces the scanner in Real Time mode (with data acknowledgement); Erases all captured data stored in memory. The scanner should have been previously set in the “No data loss mode” ON (So scan the “Enable Real Time with No Data Loss mode” barcode before).
Enable ACK beep
1.4.3.No Data Loss mode - Disable “ACK” beep
Forces the scanner in Real Time mode (without data acknowledgement); Erases all captured data stored in memory. The scanner should have been previously set in the “No data loss mode” ON (So scan the “Enable Real Time with No Data Loss mode” barcode before).
Disable ACK beep
1.4.4.Real Time - Buffered data option
It’s possible to set the scanner in “Real Time with No Data Loss mode” but with no bufferisation (buffer configured to 0) when it’s not connected. In this particular situation the trigger will not activate the beam: so impossible to read barcodes in this mode, and Both LEDs blinks orange.
Max Buffered Barcodes = 0
RoadRunners Evolution | - 12 - |
