Baracoda L (1D), LA (LASER) APPENDIX 2 - AIM symbology identifiers structure, Symbology Character

Data Capture for Workforce in Motion

4.APPENDIX 2 – AIM symbology identifiers structure

The SI prefix is a two (2) or three (3) character string: ] c m where

] : SI indicator

c : Symbology Identification

m : Modifier characters (optional)

Symbology Character

A	Code 39
B	Telepen
C	Code 128
D	Code One
E	EAN/UPC
F	Codabar
G	Code 93
H	Code 11
I	ITF 25
K	Code 16K
L	PDF417
M	MSI code
N	Anker Code
O	Codablock
P	Plessey Code
R	Straight 2 of 5 (two bar start/stop codes)
S	Straight 2 of 5 (three bar start/stop codes)
T	Code 49
X	Other Bar code
Z	Non Barcode data

Modifier Characters

The modifier character is determined by summing the option values of each symbology. If the sum is greater than 9, use A, B, C, D, E, F in the place of 10, 11, 12, 13, 14 and 15.

Code 39 Option Values

0No check character or Full ASCII

1Reader has performed mod 43 check

2Reader has performed mod 43 check and stripped the check character

4 Reader has performed Full ASCII conversion

Telepen Option Values

0Full ASCII mode

1Double density numeric mode

2Double density numeric followed by full ASCII

4Full ASCII followed by double density numeric

Code 128 Option Values

0Standard

1Function code 1 in first character position

2Function code 2 in second character position

4Concatenation according to ISBT specification has been performed, and concatenated data follows.

RoadRunners Evolution –L (1D) & -LA (Laser) – Programming Guide v1.8 - 49 -