IBM 704 manual Post Error Messages

POST Error Messages

POST Message	Description
0800	A PCI I/O Port Conflict occurred.
	Action: Turn off the system and wait 30 seconds; then, turn it
	back on. If the problem recurs, have the system
	serviced.
0801	A PCI Memory Conflict occurred.
	Action: Turn off the system and wait 30 seconds; then, turn it
	back on. If the problem recurs, have the system
	serviced.
0802	A PCI IRQ Conflict occurred.
	Action: Turn off the system and wait 30 seconds; then, turn it
	back on. If the problem recurs, have the system
	serviced.
0803	The PCI Error Log is Full.
	Action: Turn off the system and wait 30 seconds; then, turn it
	back on. If the problem recurs, have the system
	serviced.
0804	PCI ROM Not Found, May be OK For This Card: Bus nn,
	Device nn, Function nn.
	Action: None required. This message is for information only.
0810	A Floppy Disk Controller Resource Conflict occurred.
	Action: Start the System Configuration Utility and check for
	conflicts. If the problem recurs, have the system
	serviced.
0811	A conflict occurred with the Primary IDE Controller Resource.
	Action: Start the System Configuration Utility and check for
	conflicts. If the problem recurs, have the system
	serviced.
0812	A conflict occurred with the Secondary IDE Controller
	Resource.
	Action: Start the System Configuration Utility and check for
	conflicts. If the problem recurs, have the system
	serviced.
0815	A conflict occurred with the parallel port Resource.
	Action: Start the System Configuration Utility and check for
	conflicts. If the problem recurs, have the system
	serviced.

240PC Server 704 User's Handbook