IBM 704 manual Removing a Hot-Swap Drive

Removing Internal Drives

Removing a Hot-Swap Drive

Notes:

1.To locate the hot-swap bays, see the first illustration given under “Removing Internal Drives” on page 180.

2.You do not have to turn off the server to remove a drive from the hot-swap bays.

3.Refer to the RAID adapter documentation for additional information about hot-swap drives.

Each drive has three indicator lights visible at the front of the server. Check the individual indicator lights to determine which drive is faulty and needs to be swapped out. To locate these lights, see the following illustration.

		Power On Light
CD-ROM		Power Failure Light
		Cooling Failure Light
In-Use
Light		Drive Failure Light
	Diskette In-Use
		Information Panel
	Light

Hard Disk

Fault

Hard Disk

In-Use

Hard Disk

Power-On

188PC Server 704 User's Handbook