Removing Adapters

Removing Adapters

14 Attention: Expansion-slot covers must be installed on all vacant slots. This maintains the electromagnetic emissions characteristics of the system and ensures proper cooling of system components.

To remove an adapter, do the following steps:

1.Remove the adapter:

Note: If you are removing a PCI adapter, the screw is on the inside back of the server.

a.Disconnect the cables that are attached to the adapter that you are removing.

b.Note the slot number of the adapter that you are removing.

Chapter 4. Installing Options 151

Page 169
Image 169
IBM 704 manual Removing Adapters