IBM 704 manual Installing Internal Drives

Installing Internal Drives

6.Orient the drive .3/ so that the power and signal .4/ connectors are near the top surface of the drive; then, place the drive on the static-protective surface again.

7.Place the carrier .2/ on top of the drive.

8.Attach the carrier using four screws .1/ of appropriate size and length. The carrier includes EMI/ESD grounding clips .5/ that make contact with the drive through two of the screws.

Note: The screws are included in the drive accessory kit that came with your server.

1

2

5

3

4

176PC Server 704 User's Handbook