IBM 704 manual Installing a Microprocessor Before you begin

Installing a Microprocessor

Before you begin:

Be sure you have:

ŸRead “Electrical Safety” on page 75 and “Handling Static-Sensitive Devices” on page 77 (or your safety booklet).

ŸRemoved the front and side covers (see “Preparing to Install Options” on page 78).

ŸObtained the Processor Upgrade Option Kit.

ŸObtained one of the following operating systems (optional) at the specified release level:

–IBM OS/2 for Symmetrical Multiprocessing Version 2.11 (OS/2 2.11 for SMP) or later

–Microsoft Windows NT Server 3.51 or later

ŸLocated the documentation that comes with your server and operating system.

Notes:

1.The illustrations in this section might differ slightly from your hardware.

2.If you have installed OS/2 2.1 for SMP, you must add the statement PSD=OS2APIC.PSD to the CONFIG.SYS file, or reinstall OS/2 2.11 for SMP.

3.For the latest information about SMP operating systems supported by your PC Server 704:

ŸIn the U.S., call 1-800-772-2227.

ŸIn Canada, call 1-800-565-3344.

ŸIn all other countries, contact the IBM support organization that services your area, your IBM marketing representative, or your IBM reseller.

4.To order additional microprocessor options, contact your IBM reseller or IBM marketing representative.

5.To avoid damage and ensure proper server operation when you install a new or additional microprocessor, use the same speed

Chapter 4. Installing Options 87