Installing Internal Drives

3.Remove the metal EMI shield from the bay opening:

a.At the left side of the shield, push the tabs .1/ slightly to the right while pulling out.

b.Pull the right edge of the shield out from the chassis slot

.2/. Save the shield to reuse if you remove a drive from a bay later and do not reinstall one.

4.Remove the drive from the static-protective bag and place it on a static-protective surface.

5.Set any jumpers or switches on the drive according to the documentation that came with the drive.

6.Go to Table 12 on page 286 to record the drive location and the SCSI ID; then, return here to determine your next step.

IBM 704 manual Installing Internal Drives