IBM 704 manual Installing Internal Drives

Installing Internal Drives

7.Attach the plastic snap-in slide rails and an EMI/ESD grounding clip to the drive:

a.Attach plastic snap-in slide rail B .2/ to the left side of the drive, using two screws .4/ of the appropriate size and length.

b.Install the grounding clip under the screw head near the front of the drive, as shown in .3/.

c.Attach slide rail A .1/ to the right side of the drive, using two screws of the appropriate size and length.

Note: The screws are included in the drive accessory kit that came with your server.

1

2

4

3

8.Place the drive so that the plastic side rails engage in the bay guide rails. Push the drive into the bay until the rails lock in place.

Chapter 4. Installing Options 169