IBM 704 manual Installing Internal Drives

Installing Internal Drives

To install a removable-media drive in the upper-left front bays, do the following steps:

1.Remove the filler panel from the bay in which you plan to install the drive:

a.Press the two panel frame release tabs.1/, located between the front edge of the cardcage and the metal flange (the tab locations are pinpointed but not shown at .1/ in the following figure).

b.Swing the frame out to the right; then, remove it from the chassis by disengaging the hinge tabs at the right edge of the frame (at .2/ in the following figure).

1

2

c.Place the filler panel frame face down on a soft surface to prevent marring the front of the frame unit.

166PC Server 704 User's Handbook