IBM 704 manual Installing Adapters

Installing Adapters

6.Install the adapter:

a.Carefully grasp the adapter .2/ by its top edge or upper corners, and align it with the expansion slot on the system board.

b.Press the adapter firmly into the expansion slot. The tapered foot of the adapter-retaining bracket must fit into the mating slot in the expansion-slot frame.

c.Align the rounded notch in the retaining bracket with the threaded hole in the expansion-slot frame. The retaining bracket fits into the space that was occupied by the slot cover.

d.Insert the expansion-slot screw .1/ that you removed in step 2a on page 147 into the threaded hole, and push the rounded notch up against the screw.

e.Tighten the expansion-slot screw firmly (6.0 inch-pounds) on the top of the adapter-retaining bracket.

1

2

148PC Server 704 User's Handbook