Starting the Test Programs

Changing Selected Tests in Test Groups

To add or remove a test from a Test Group:

1.In the Module Tests Menu, use the Up Arrow (↑) or Down Arrow (↓) key to move the highlight bar to your selection.

2.Press Tab to move into the expanded Test Group window.

3.Move the highlight bar to the test you want to select or deselect.

4.Press the Spacebar at the highlighted test to toggle between select (indicated by a “♦”) and deselect.

Note: An asterisk (*) directly adjacent to an item indicates that running that test might damage your data. Make sure to back up all of your data before running the tests.

5.Press Enter.

Creating Test Scripts

Scripting allows you to select specific groups of tests, testing parameters, and options. You can then save your selections for later use as a test script.

To set up a test script:

1.Select Diagnostics from the Main Menu; then press Enter.

2.Select Module Tests; then press Enter.

3.Select the test groups and specific tests.

4.Select Save Script (the last item on the Options Menu).

5.Type in a file name. The test program automatically adds the extension “QA.”

6.To load and run the test program with this test setting, type: QAPRO /SCRIPT-Filename,R and then, press Enter.

Note: Adding the “,R” runs the tests listed in the named Test Script. If this is omitted, the diagnostic program loads only the program with the test settings as previously saved in the chosen Script File.

228PC Server 704 User's Handbook

Page 246
Image 246
IBM 704 manual Changing Selected Tests in Test Groups, Creating Test Scripts