IBM 704 manual Installing the Side Covers

Installing the Side Covers

Installing the Side Covers

Before you begin:

Be sure you have:

ŸRead “Electrical Safety” on page 75 and “Handling Static-Sensitive Devices” on page 77 (or your safety booklet).

ŸTurned off peripheral devices (see “Preparing to Install Options” on page 78).

11 Attention: For correct cooling and airflow, always replace the top and side covers before turning on the server. Operating the server with the covers removed might damage server components.

12 Attention: Do not damage or displace the electromagnetic interference (EMI) gaskets mounted on the cover. Replace any damaged gaskets, or your server might not meet EMI requirements.

Note: You must install the top cover before you can install the side covers.

To install either of the server side covers, do the following steps:

1.Before installing a side cover, make sure that you have not left loose tools or parts inside the server. Check that all cables, adapters, and other components are installed and seated correctly.

2.Align the cover so that the padlock slot at the back edge fits over the loop at the back edge on the chassis.

Chapter 4. Installing Options 203