IBM 704 manual Installing Memory-Module Kits

Installing Memory-Module Kits

e.Repeat these steps for each memory module that you install.

7.Reinstall the memory board:

a.On the system board .1/, locate the connector .2/ for the memory board .3/.

1

2

3

15a Attention: When you install adapters, processor boards, or memory boards in the server, be sure that they are completely and correctly seated in the system-board connectors before you apply power. Incomplete insertion might cause damage to the system board or the adapters that you are installing.

b.Grasp the memory board by the corners, with the ejector handles turned outward to a 90-degree angle from the memory board.

c.With the SIMM sockets facing down, carefully slide the memory board into the appropriate slot guides on the system board, until the board just touches the connector on the system board.

d.Press the memory board firmly into the system-board connector.

120PC Server 704 User's Handbook