Installing Memory-Module Kits

2.Remove the memory board:

a.Disconnect the memory board from the system board by rotating the memory-board corner handles outward to a 90-degree angle from the memory board.

b.Grasp the memory-board corner handles and carefully slide the memory board out of the slot. Avoid touching the components and gold-edge connectors on the memory board.

3.Place the memory board, component-side up, on a flat, static-protective surface.

4.Locate the memory-module connectors on the memory board.

When you are instructed to install the kits (in step 6 on

page 119), install them in pairs of adjacent memory connectors, with no vacant memory connectors in between.

118PC Server 704 User's Handbook

Page 136
Image 136
IBM 704 manual Installing Memory-Module Kits