IBM 704 manual Installing Internal Drives

Installing Internal Drives

9.Connect a signal cable .1/ to the back of the drive. If a narrow SCSI cable is already connected to devices in the 5.25-inch drive bays, add your drive to the cable. Otherwise, install a standard 50-pin ribbon cable: connect this cable to connector J8 (on the lower backplane for the 5.25-inch drive bays) and to the drive.

10.Connect a power cable .2/ to the back of the drive. Power cables for removable-media drives come with your server. The connectors are keyed and can be inserted only one way.

1

2

170PC Server 704 User's Handbook