IBM 704 manual Action

POST Error Messages

POST Message	Description
0043	The EISA configuration is not valid for the slot.
	Action: Start the System Configuration Utility and check for
	conflicts. If the problem recurs, have the system
	serviced.
0044	The EISA configuration is not assured!
	Action:
	Ÿ If you have just added, removed, or changed the
	location of an EISA or an ISA adapter, start the
	System Configuration Utility and update the
	configuration information. If the problem recurs,
	have the system serviced.
	Ÿ If you have not just added, removed, or changed
	the location of a device, run the test programs to
	identify the failing device. Then have the system
	serviced.
0045	The EISA expansion board is not ready in the slot.
	Action: Reseat the expansion board. If the problem recurs,
	have the system serviced.
0047	The EISA CMOS configuration is not set.
	Action:
	Ÿ If you have just added, removed, or changed the
	location of an EISA or an ISA adapter, start the
	System Configuration Utility and update the
	configuration information. If the problem recurs,
	have the system serviced.
	Ÿ If you have not just added, removed, or changed
	the location of a device, run the test programs to
	identify the failing device. Then have the system
	serviced.
0048	An error occurred in the EISA checksum.
	Action: Turn off the system and wait 30 seconds; then, turn it
	back on. If the problem recurs, have the system
	serviced.
0049	The EISA NVRAM is invalid.
	Action: Turn off the system and wait 30 seconds; then, turn it
	back on. If the problem recurs, have the system
	serviced.

Chapter 5. Solving Problems 233