IBM 704 manual Configuring for Windows NT Server, Installing Multiple Adapters

Configuring the 100/10 PCI Ethernet Adapter

Installing Multiple Adapters

Repeat the configuration procedures for each adapter that you want to install. Even though the Ethernet Configuration and Drivers program can detect all the PCI adapters in your server, you must perform the installation process before you can use the adapter.

Configuring for Windows NT Server 3.51

To configure the Ethernet adapter for the Windows NT Server 3.51 operating system:

1.Double-click the Network icon in the Control Panel.

2.Click the Add Adapter button.

3.Scroll to the end of the list and select <Other> Requires disk from manufacturer.

4.Insert the Ethernet Configuration and Drivers diskette in drive A and click OK.

The Ethernet Configuration and Drivers program automatically scans server resources and determines what resources were assigned to the adapter.

5.Click Test.

If you just added the adapter, the network driver will not be active and the diagnostics will test the adapter and its connection to the network.

If you are testing an adapter that has already been installed, the network driver will probably be active and the diagnostics will test the driver. This diagnostic tracks the actual network activity of the driver.

6.Click OK to accept the configuration.

7.Click OK in the Network Settings dialog and, when prompted, restart Windows NT Server 3.51.

68PC Server 704 User's Handbook