IBM 704 manual Replacing the Real-Time Clock

Replacing the Real-Time Clock

9.Reinstall the board-support panel:

a.Align the support panel so that the three tabs .1/ at the back left edge of the panel fit into the three chassis slots.

b.Close the panel. Check to make sure that the boards in the slots behind the panel align with the scribe marks on the panel. Use the scribe marks at .2/ to check the alignment of the memory board. Use the scribe marks at .3/ to check the alignment of the processor boards.

1

2

3

c.Secure the panel with the four screws that you removed in step 1b on page 138.

d.Reinstall the exterior side panel.

10.Because your server contains a new RTC, you must reconfigure your server to restore the system settings (for example, date and time). To do this, run the System Configuration Utility program as described in Chapter 3, “Configuring Your Server” on page 39. Then, return here and continue with “What to do next?” on page 142 to determine your next step.

Chapter 4. Installing Options 141