IBM 704 manual Post Error Messages

POST Error Messages

POST Message	Description
0132	Floppy drive B:
	The system is not able to start the diskette in the drive. The
	diskette might be damaged, incorrectly formatted, or inserted
	incorrectly.
	Action: Try another startable diskette. If the problem recurs,
	have the system serviced.
	If the problem recurs, have the system serviced.
0135	The floppy disk controller failed.
	Action: Turn off the system and wait 30 seconds, then, turn it
	back on. If the problem recurs, have the system
	serviced.
0140	The shadow of the server BIOS failed.
	Action: Turn off the system and wait 30 seconds; then, turn it
	back on. If the problem recurs, have the system
	serviced.
0175	The CPU modules are not compatible.
	Action: Have the system serviced.
0176	The CPU failed. See Slot 1, CPU #1.
	Action: Have the system serviced.
0177	The CPU failed. See Slot 1, CPU #2.
	Action: Have the system serviced.
0178	The CPU failed. See Slot 2, CPU #1.
	Action: Have the system serviced.
0179	The CPU failed. See Slot 2, CPU #2.
	Action: Have the system serviced.
0180	The server is attempting to start with a failed CPU.
	Action: Run the test programs to determine the cause of the
	problem and the action to take. If the problem recurs,
	have the system serviced.
0191	The CMOS battery has failed.
	Action: Replace the real-time clock (see “Replacing the
	Real-Time Clock” on page 137).

Chapter 5. Solving Problems 235