Starting the Test Programs

IntruderAlert

Each time you start the diagnostic programs, IntruderAlert checks for damage to the Diagnostic Diskette. If a virus or program alteration is detected, the diagnostic programs will not load.

To suspend IntruderAlert and continue loading the diagnostic programs, press Esc.

Starting the Test Programs

To start the test programs from diskette:

Note: Use your backup copy of the Diagnostic Diskette to run the diagnostic programs.

1.Insert the backup copy of the Diagnostic Diskette into the primary diskette drive (usually drive A).

2.Turn on the system. The IBM PC Server 704 logo appears on your screen, followed by the system running POST. When POST completes, QAPlus/PRO for IBM appears on your screen.

3.Press any key to continue. The Welcome window appears.

4.Press any key to continue.

Note: IntruderAlert starts and runs automatically after you press any key. If IntruderAlert detects a problem with the diagnostic diskette, it will automatically stop further testing. See “IntruderAlert” for more information.

5.Press Enter.

Several analysis programs start and run automatically. When they complete, the Main Menu appears.

6.Use the Up Arrow (↑) or Down Arrow (↓) key to move the highlight bar to your desired Main Menu selection.

7.Press Enter.

Note: To stop running a specific test or stop testing after you have started a test, press Esc while the test is running. The test pauses at the first possible opportunity, and the Skip/Abort Test Menu appears.

Chapter 5. Solving Problems 225

Page 243
Image 243
IBM 704 manual Starting the Test Programs, IntruderAlert