Removing the Top Cover

Removing the Top Cover

Before you begin:

Be sure you have:

ŸRead “Electrical Safety” on page 75 and “Handling Static-Sensitive Devices” on page 77 (or your safety booklet).

ŸTurned off peripheral devices (see “Preparing to Install Options” on page 78).

ŸRemoved both of the side covers (see “Removing the Side Covers” on page 81).

To remove the server top cover, do the following steps:

1.Remove the three retaining screws from the back edge of the top cover. Save the screws to reuse when you reinstall the cover.

12 Attention: Do not damage or displace the electromagnetic interference (EMI) gaskets mounted on the cover. Replace any damaged gaskets, or your server might not meet EMI requirements.

Chapter 4. Installing Options 83

Page 101
Image 101
IBM 704 manual Removing the Top Cover