SCSISelect Utility Program
The SCSI-2 controllers have built-in menu-driven configuration
utility programs that allow you to view and change SCSI settings.
You can use the SCSISelect Utility programs to:
Change the default values
Verify and change configuration conflicts
Format a new SCSI hard disk
Starting the SCSISelect Utility Program
You can access this program when you start the server. During
system startup, the IBM PC Server screen appears briefly and then
disappears. The following prompt is displayed:
<<< Press <CTRL><A> for SCSISelect Utility! >>>
Press Ctrl+A when you see this prompt.
Use the Up Arrow (↑) or Down Arrow (↓) key to move the
highlight bar to the various menu choices. Press Esc to return to the
previous menu. Also, you can press F5 to switch between color and
monochrome modes (if your monitor permits). To change the
current settings of the items displayed in the menus, follow the
directions on the screen.
SCSISelect Utility Program Options
The following options appear on the SCSISelect Utility program
menu:
Configure/View Host Adapter Settings
SCSI Disk Utilities
64 PC Server 704 User's Handbook