IBM 704 manual Post Error Messages

POST Error Messages

POST Message	Description
0452	An error occurred in the DMA Controller.
	Action: Turn off the system and wait 30 seconds; then, turn it
	back on. If the problem recurs, have the system
	serviced.
0460	An error occurred in the Fail-safe Time NMI.
	Action: Turn off the system and wait 30 seconds; then, turn it
	back on. If event logging is enabled, POST logs this
	event in nonvolatile flash memory. If the problem
	recurs, have the system serviced.
0461	An error occurred in the Software Port NMI.
	Action: Turn off the system and wait 30 seconds; then, turn it
	back on. If the problem recurs, have the system
	serviced.
0465	An error occurred in the Bus Timeout NMI in Slot n.
	Action: Turn off the system and wait 30 seconds; then, turn it
	back on. If the problem recurs, have the system
	serviced.
0467	A NMI error occurred in the Expansion Board in Slot n.
	Action: Turn off the system and wait 30 seconds; then, turn it
	back on. If the problem recurs, have the system
	serviced.
0501	A PCI System Error occurred.
	Action: Turn off the system and wait 30 seconds; then, turn it
	back on. If event logging is enabled, POST logs this
	event in nonvolatile flash memory. If the problem
	recurs, have the system serviced.
0510	A PCI Parity Error occurred.
	Action: Turn off the system and wait 30 seconds; then, turn it
	back on. If the problem recurs, have the system
	serviced.
0710	A System Board Device Resource Conflict occurred.
	Action: Turn off the system and wait 30 seconds; then, turn it
	back on. If the problem recurs, have the system
	serviced.
0711	A Static Device Resource Conflict occurred.
	Action: Turn off the system and wait 30 seconds; then, turn it
	back on. If the problem recurs, have the system
	serviced.

Chapter 5. Solving Problems 239