IBM 704 manual Removing Memory-Module Kits

Removing Memory-Module Kits

Removing Memory-Module Kits

16 Attention:

a. Reduce the risk of electrostatic discharge (ESD) damage to the memory modules and memory board by following the instructions in Notice Number 10.

b. To avoid breaking the retaining clips or damaging the sockets, handle the clips gently.

1.Remove the board-support panel:

a.Remove the left side panel .1/.

b.Remove the four screws .2/ from the right edge of the board-support panel. Save the screws for later use.

1

2

c.Open the board-support panel.

d.Remove the board-support panel by pulling the back edge away from the three slots at the back of the chassis.

e.Store the panel until you are ready to reinstall it.

124PC Server 704 User's Handbook