IBM 704 manual Program Navigation, Using the Function Keys

About the Test Programs

Format Diskette. For more information about the File Editor, see “Using the File Editor” on page 265.

ŸExit: Select this choice to exit from the Diagnostic Diskette.

Program Navigation

You can maneuver within the test programs by typing the first letter of a menu choice, using the function keys, or using command-line options.

Using the Function Keys

You can use the following keys to maneuver within the test programs:

Enter	Selects an item, runs the test module, or runs
	the test.
Down Arrow (↓)	Moves the cursor down.
Up Arrow (↑)	Moves the cursor up.
F1	Displays the appropriate Help information.
	Use the Up Arrow (↑) or Down Arrow (↓) key
	to scroll through the information. Pressing F1
	from within a Help screen provides a Help
	index from which you can select different
	categories. One of the important help
	categories is function key usage. Pressing Esc
	exits Help and returns to where you were
	previously.
Esc	Returns to the previous menu.

Additional keys are active in the Test Module Selection and Test Group screens. These include:

Tab	Moves the highlight bar (or cursor) to the test
	group (or moves to parameters).
Spacebar	Toggles modules on or off (or toggles tests on
	or off).
F2	Displays current test results log.

Chapter 5. Solving Problems 221