System Configuration Utility

prevent damage to the original diskette. Your operating-system documentation provides information on backing up diskettes.

Starting the System Configuration Utility Program

To access the System Configuration Utility program:

1.Insert the backup copy of the System Configuration Utility program diskette into the diskette drive.

2.Turn on the system. Or, if the system is turned on, press Ctrl+Alt+Del.

Or, at the DOS prompt for drive A, type SCU and press Enter.

The system begins the power-on self-test (POST). If you have set a user password, the system prompts you to enter it.

Notes:

a.If a user password is set, you must enter it to access the System Configuration Utility program. If you have set user and administrative passwords, you can enter either one.

b.If a configuration error occurs, a prompt appears before the operating system starts (see “Configuration Conflicts” on page 61).

3.Press Enter when the SCU title screen appears.

4.Follow the instructions on the Main Menu screen to view or change the configuration. The remainder of this chapter explains the menu selections. Refer to “Utilities” on page 51 for information on the SCU utilities accessible from this screen.

Step 1: About System Configuration

Select About System Configuration for an overview of the program. You can select from a menu for specific information about each function.

You can also press F1 for on-line Help information while performing a configuration function.

Chapter 3. Configuring Your Server 47

Page 65
Image 65
IBM 704 manual Starting the System Configuration Utility Program, About System Configuration