IBM 704 manual Installing Memory-Module Kits

Installing Memory-Module Kits

To install memory modules on a memory board, do the following steps:

1.Remove the board-support panel:

a.Remove the left side panel .1/.

b.Remove the four screws .2/ from the right edge of the board-support panel. Save the screws for later use.

1

2

c.Open the board-support panel.

d.Remove the board-support panel by pulling the back edge away from the three slots at the back of the chassis.

e.Store the panel until you are ready to reinstall it.

Chapter 4. Installing Options 117