Installing Internal Drives

12.If you are installing another 5.25-inch drive, return to step 2 on page 167. Otherwise, continue with the next step.

13.Reinstall the filler panel frame:

a.Align the hinge tabs at the right edge of the filler panel frame with the corresponding slots in the chassis.

b.Swing the panel frame to the left until it latches.

14.When you have no more options to install, run the System Configuration Utility program to specify that the drive is installed in the system. If your server has a RAID adapter installed, refer to the RAID adapter documentation for details about configuration requirements. Record the RAID configuration information in the appropriate tables in “Installed Device Records” on page 280.

What to do next?

ŸInstalling a hot-swap drive? — Go to “Installing a Drive in a Hot-Swap Bay” on page 173.

172PC Server 704 User's Handbook

Page 190
Image 190
IBM 704 manual What to do next?