FM Radio
wSystem Reset
To reset switch off, then back on at mains supply. Press and hold “CONFIRM” knob/button and press “STANDBY”. Continue to hold “CONFIRM” until the unit displays “System Reset”. FM Radio will go into scan mode.
System Reset
wState Display (Tuned)
When a user has tuned to a station, the station details are recorded in persistent storage so that if the radio is turned off and then on again, or an invalid preset or offair station is chosen, then the radio can revert to the last station.
The standard tuned display is as follows…
Classic FM
Currently Playing
The ‘FM in the top left corner, indicates that the radio is in FM mode.
wAutoTune Button (SCAN on the remote)
This button activates the ‘Auto Tune’ function which searches for the next available FM station.
wCONFIRM Button
This button is used to enter the receiver configuration mode, AUTO or MONO. (AUTO will select STEREO if available).
wSelect Up/Down Buttons
wStoring Stations on Preset Buttons
If a preset button is pressed and held for at least 2 seconds, then that assigns the current station to the selected preset (in this example preset 4 is selected).
92.6MHz FM
Preset 04 Stored
After 3 seconds the display reverts to the current display mode. 92.6MHz FM
The bottom line of the display will show transmitted text if the station chosen transmits RDS.
wRecalling Station
If a preset button is pressed and released, then that initiates tuning to the station previously stored under that preset.
If no preset has previously been stored then the following message is displayed for 3 seconds…
FM
Preset 01 Empty
Then reverts to the current station display 92.6MHz FM
- 20 -