wINFO Button (Unit and Remote)
If the INFO button is held down for more than 2 seconds, then this causes the advanced information display to be shown. When the info button is clicked or held subsequently, then the info display returns to the start of the cycle.
Pressing INFO once will give you the following option:
wProgram Type
The bottom line displays the static PTY information centred (in the long name format, max. 16 characters).
Planet Rock DAB
Pop Music
Pressing INFO twice will give you the following option:
wMultiplex Name
The bottom line displays the Ensemble/Multiplex name centred (in the long name format, max. 16 characters).
Planet Rock DAB
CE London
Pressing INFO three times will give you the following option:
wSignal Quality
The bottom line displays a graphical representation of the signal quality of the ensemble currently being decoded and shows an indication of the minimum signal quality necessary for successful decoding.
Poor signal quality…
Planet Rock DAB
Good signal quality…
Planet Rock DAB
The solid block is used to denote the point at which signal quality (hence audio quality) becomes acceptable. Below this point audio may still decode, but audio artifacts (first burbling, then muting) will be heard.
This display will be continuously updated so that the user can use it to position the radio to obtain the best reception.
Pressing INFO four times will give you the following option:
wTime and Date
The bottom line displays the time and the date in the following format.
Planet Rock DAB 17:23 06.08.2003
- 19 -