Connection
Caution: Please turn off all the equipment power before connecting.
Connect to the TV
Connecting diagram
Terminal board for the DVD player
TV |
Connections to TV
Safety precautions
Some settings should be made for the unit according to the TV connection.
*According to the colour system setting of TV, select the colour system in the “TV Display” function setting.
*If the unit is connected to a wide screen TV, then set the “TV display” to “Wide” in the function setting menu.
*If the unit is connected to a TV, then set “TV display” to “Normal/PS” or “Normal/LB” in the function setting item.
Connecting the Speakers
Connect the speaker cords between the terminals as shown below.
Connect the cords with a silver line to the (+) (L) (R) terminals and cords with a gold line to the
Connection precautions
1. This unit has a high power output and wide dynamic range. If speakers other than those supplied are used, they must be chosen according to speaker specification, or the speakers may be damaged.
2. Before connecting or removing mains power, please turn off the power on the unit and turn the volume to minimum or it may damage the speakers.
Connecting the Antenna
Tighten the antenna rod clockwise on the base of the antenna.
*The antenna should be connected to the antenna socket, tighten the antenna by hand with tool supplied. (Please note: Do not overtighten, this could damage the antenna or it’s fittings.)
*Position the antenna for the best reception.
Warning: The antenna supplied has a magnetic base. It must not be placed on any products that are sensitive to magnetism, such a TV’s and computers as this may cause damage.
- 5 -
