wScrolling Text
The bottom line displays transmitted text giving information regarding the tuned station transmission.
wStoring Stations on Preset Buttons
If a preset button is pressed and held for at least 2 seconds, then that assigns the current station to the selected preset.
After 3 seconds the display reverts to the current display mode.
Planet Rock DAB
Preset 04 Stored
wRecalling Station
If a preset button is pressed and released, then that initiates tuning to the station previously stored under that preset.
Classic DAB
Tuning...
If tuning is successful then the display reverts to the tuned state
Classic DAB
Air on a G String by
If tuning is not successful, then the ‘not available’ message is displayed.
If no preset has previously been stored then the following message is displayed for 3 seconds…
Planet Rock DAB
Preset 01 Empty
Then reverts to the current station display.
Planet Rock DAB
wQuick Scan
If the user presses the SCAN (Auto Tune) button briefly, then only a (Quick) scan of channels 11A – 12D is undertaken (unless a previous full scan has detected an ensemble outside this range, in which case a persistent flag has been set and a Full scan is undertaken instead.
Auto Tune
Quick Scan
The above message is displayed on the screen for at least 2 seconds.
wFull Scan
If the user holds the SCAN (Auto Tune) button down for at least 2 seconds, then a (Full) scan of all channels in Band III is undertaken. The following message is displayed on the screen for at least 2 seconds. If any ensembles are found during the full scan that lie outside the normal UK Band III range, then a persistent flag is set to indicate the fact, to ensure that even a short press of the SCAN (Auto Tune) button will initiate a full scan next time.
Auto Tune
Full Scan
- 18 -