Removing the Side Covers

Removing the Side Covers

Before you begin:

Be sure you have:

ŸRead “Electrical Safety” on page 75 and “Handling Static-Sensitive Devices” on page 77 (or your safety booklet).

ŸTurned off peripheral devices (see “Preparing to Install Options” on page 78).

You must remove both side covers before you can remove the top cover.

To remove either of the server side covers, do the following steps:

1.Unlock and remove any padlock .2/ on the side cover.

2.Remove the three screws .1/ from the back edge of the side cover. Save the screws to reuse when you reinstall the cover.

Chapter 4. Installing Options 81

Page 99
Image 99
IBM 704 manual Removing the Side Covers