Installing Internal Drives
Refer to the instructions that come with the SCSI device for more
information about termination. Refer to the User's Reference for
additional information about your server's SCSI subsystem.
Preinstallation Steps (All Bays)Before you install drives in your PC Server 704, verify that you have
all of the cables, drive trays, and any other equipment specified in
the documentation that comes with the internal drive. You might
also need to perform certain preinstallation activities. Some of the
steps are required only during the initial installation of an option.
Before you begin:
Be sure you have:
Read “Electrical Safety” on page 75 and “Handling
Static-Sensitive Devices” on page 77 (or your safety booklet).
Read the documentation that comes with the internal drive.
Opened the server cover (see “Preparing to Install Options”
on page 78).
1. Choose the bay in which you want to install the drive.
2. Touch the static-protective bag containing the drive to any
unpainted metal surface on the server; then, remove the drive
from the bag.
Static
Devices
Chapter 4. InstallingOptions 163