IBM 704 manual Installing a Microprocessor

Installing a Microprocessor

Insert the secondary processor board, component-side up.

c.Slide the processor board into the appropriate slot guides on the system board.

d.Press the processor board carefully but firmly into the system-board connector.

e.Rotate the processor-board handles to the closed position, until the handles are aligned with the front edge of the processor board.

15 Attention:

a. When you install adapters, processor boards, or memory boards in the server, be sure that they are completely and correctly seated in the system-board connectors before you apply power. Incomplete insertion might cause damage to the system board or the adapters that you are installing.

b. Make sure you orient the processor board correctly before pressing it into its connector. Failure to do so

Chapter 4. Installing Options 99