Cisco Systems Cisco 12008 manual Reviewing the Running Configuration Settings

Configuring the Cisco 12008

Reviewing the Running Configuration Settings

To display the running configuration settings stored in NVRAM, issue the show startup- config command at the privileged EXEC mode prompt. This command displays output in the following form:

Router# show startup-config

Using 1133 out of 520184 bytes

!

version 11.2

no service udp-small-servers no service tcp-small-servers

!

hostname Router

!

enable password wilma

ip cef distributed switch ip host biff 3.3.3.254

!

interface Ethernet0

ip address 3.3.1.1 255.255.0.0 no ip mroute-cache

!

interface POS3/0

ip address 2.1.1.1 255.0.0.0 no keepalive

crc 16

no cdp enable

!

interface POS3/1

ip address 2.1.1.2 255.0.0.0 no keepalive

crc 16

no cdp enable

!

interface POS3/2

ip address 2.1.1.3 255.0.0.0 no keepalive

crc 32

no cdp enable

!

interface POS3/3

ip address 2.1.1.4 255.0.0.0 no keepalive

crc 32

Observing System Startup and Performing a Basic Configuration 4-31