Cisco Systems Cisco 12008 Unpacking the Cisco, Checking the Contents of the Shipping Container

Unpacking the Cisco 12008

•

•

•

9/16-inch wrench (open-end or socket)—for removing the lag bolts from the router shipping pallet

Wire cutters

Pliers

Unpacking the Cisco 12008

To unpack your Cisco 12008, use the instructions in the document entitled Cisco 12008 Gigabit Switch Router System Packing and Unpacking Instructions, which was shipped with the router. Appendix A of this document describes the shipping container for the Cisco 12008; it also provides instructions for unpacking the router prior to installation and how to repackage the router if you need to move it at some later time.

Note Do not discard the packaging materials used in shipping your router. You will need this material in the future if you move or ship your router.

If the packing materials are lost or damaged, replacement packing materials are available as an orderable item (product number PKG-GSR8=).

Checking the Contents of the Shipping Container

Check the contents of the shipping container to verify that the following items have been included in the shipment:

•One Cisco 12008 router as ordered, fully assembled

•One RP

•CSCs, SFCs, and line cards, as ordered

•One or two AC-input or DC-input power supplies, as ordered, already installed in the router

•An accessories box (packed with the router on the shipping pallet)

Preparing for Installation 2-27