Cisco Systems Cisco 12008 manual Plastic Safety Shield on the DC-Input Power Supply

Adding, Removing, or Replacing a DC-Input Power Supply

(b)Grasp the safety shield and move it to the right and obliquely upward, positioning the shield so that it can be freed from the three standoffs on the power supply faceplate.

(c)Remove the shield from the standoffs and set it aside temporarily.

Figure 7-7 Plastic Safety Shield on the DC-Input Power Supply

	THIS UNIT TO BE INSTALLED
IN	IN A	RESTRICTED	ACCESS AREA
	ACCORDANCE WITH THE NEC OR THE
AUTHORITY HAVING JURISDICTION

CAUTION

THIS UNIT MAY HAVE MORE THAN ONE POWER SUPPLY CONNECTION. ALL CONNECTIONS NEED TO BE REMOVED TO DE-ENERGIZE THE UNIT.

Carrying handle

0

INPUT 0K

OUTPUT

FAIL

TER
MIN
ALS
MA
Y
BE	COM
EN
ER
GIZ	NC
ED.
BER	NO
UHR
EN
DER
ANS
CHL
USS
E
DEN
HAU
PTS
CHA
LTER

H10032

Plastic safety shield

Step 9 Unscrew the loosely mounted lock washers and nuts from all six terminals on the power supply faceplate; set this hardware aside temporarily.

7-24Cisco 12008 Gigabit Switch Router Installation and Configuration Guide