Cisco Systems Cisco 12008 manual Upgrading Memory on the RP

Upgrading Memory on the RP

If the system fails to restart properly after several attempts and you are unable to resolve the problem, contact your Cisco service representative for assistance. Before calling, however, make note of any console error messages, unusual LED states, or other system indications or behaviors that might help to resolve the problem.

The time that the system requires to initialize may vary with different router configurations and memory configurations. For example, a router with a larger complement of memory might take longer to boot.

Upgrading Memory on the RP

The Cisco 12000 Series Gigabit Switch Router Memory Replacement Instructions (78- 4338-xx), which is available on-line and on the Cisco CDROM, contains the latest information about memory requirements and replacing memory on the Cisco 12000 series RPs and line cards. Refer to that document before replacing or adding memory to your RP or line card.

You can find the Cisco 12000 Series Gigabit Switch Router Memory replacement instructions at Cisco.com:

http://www.cisco.com/univercd/cc/td/doc/product/core/cis12012/bfrcfig/4338bmem.htm

7-90Cisco 12008 Gigabit Switch Router Installation and Configuration Guide