Cisco Systems Cisco 12008 manual PRP RJ-45 Ethernet Receptacle Pinout

Connecting Route Processor Cables

Figure 3-13 RJ-45 Receptacle and Plug (Horizontal Orientation)

87654321

12

75043

1

RJ-45 receptacle

2

Category 5 UTP cable with plug

Warning The ports labeled Ethernet, 10BASE-T, Token Ring, Console, and AUX are safety extra-low voltage (SELV) circuits. SELV circuits should only be connected to other SELV circuits. Because the BRI circuits are treated like telephone-network voltage, avoid connecting the SELV circuit to the telephone network voltage (TNV) circuits.

Table 3-7	PRP RJ-45 Ethernet Receptacle Pinout
Ethernet Port Pin		Signal	Description
1		TxD+	Transmit data +
2		TxD–	Transmit data –
3		RxD+	Receive data +
4		Termination Network	No connection
5		Termination Network	No connection
6		RxD–	Receive data –
7		Termination Network	No connection
8		Termination Network	No connection

3-32Cisco 12008 Gigabit Switch Router Installation and Configuration Guide